Most of the people believe that long eyelashes make your eye looks bigger and brighter. It is debatable, but many will agree with the fact. Therefore, the 3D mink strips have become almost every person's number one pick. Usually, it has been noticed that the star applies the 3D mink strips most amazingly and naturally.
Knock out virgin hair is dedicated to helping you achieve the kissable lips and the sexy mink strips always. In this regard, they have outlined the below point to serve as your guide to applying the makeups most appropriately.
Step 1: 3D Mink Strip's Length Check
Just after buying the 3D mink strips, you might find that your eye length and type are not marching the one purchased. As such, you need to use the tweezers when using the strips to pick the lashes at the bottom or what might be called the roots, to measure them about the length of your eye.
In case the strips are longer than your eyes, make a cut that is related to the width of your eyes' shape. Similarly, ensure that the end of the strip does not overshoot on the individual eyelashes. Thus, the 3D mink strip needs to leave almost a quarter of the eyeliner, failure to which will make it difficult for you to close the eyes.
Step 2: Clip Your Eyelashes
Before you apply your 3D mink strips, you need to utilize the eyelash curler to try and curl up your eyelashes. Apply the mascara after that to help you wear the 3D mink strips naturally. Do not forget to apply the mink strips before you curl your eyelashes. The mascara will ensure that the fixing of the curvature is correctly done.
Step3: Give a Wear Glue to the 3D Mink Strip
Upon fixing your eyelashes, you need to pick up the already prepared mink strip with the roots facing up and use another strip to squeeze this glue on the lashes. Be keen not to over press as this may lead to splashing of the adhesive on the lashes.
In the process of the eyelash glue application, you should make it from either of the sides from the center to ensure that the ends of the eye have more glue due to falling off. Squeezing a little glue as you paint a short is the best grasp in this application. Do this until every part is painted while ensuring that you begin from the center to the two sides.
Step 4: Determine the Right Amount of Glue to Apply
As most people apply the 3D mink strips, one big issue that remains is determining how much glue one needs to apply before fixing the eyelashes. The mink strip glue always comes in a thickness of 0.5 to 1 mm. squeeze a considerable amount of this glue on the strips and wait for almost 30 seconds before applying the 3D mink strips.
Step 5: Wear the 3D Mink Strips for the First Time
When the glue has achieved the semi-dry state, fix the minks strip lashes with tweezers. Do the middle part first as you spread it outwards to the two sides. The center of the 3D mink strip lashes will give the lashes a real eyelash alignment.
Ensure that the middle part is stuck first because the site will be lying above the actual eyelash within the 0.5 to 1 mm. Glue the strip to the lids close to your real eyelashes. However, you should make sure not to press your real lashes line as this might pull down the lashes.
Stick the tail parts on both sides and ends of the eye to complete the process. The main aim, in this case, is to bar the middle of that part which is excess not to empty bend out. This will ensure that you get the right shape of the mink strips just like your natural eyelashes appear to be.
If you are capable of making the points above useful while fixing your 3D mink strips, you will be able to get the appearance that you have all along dreamt of. If the 3D mink strips are added to the best lipstick, your face will appear like that of the beauty queen on the red carpet.